DN-TAP-M10X1.5
THE RIGHT HOLE
Most taps don't break. They get broken.
- 10 mm diameter, 1.5 mm pitch
- ISO coarse pitch — a bolt marked plain M10 is this thread
- High speed steel, M2 grade — 65 HRC hardened
- Holds its cutting edge to about 600 °C; plain carbon steel softens from 200 °C
- Titanium nitride coated — about 2,300 HV, three times the hardness of the steel beneath
- Coating 2–5 microns thick
- Tap drill 8.50 mm (75% thread)
M10x1.5 HSS M2 TiN tap with a matched drill bit. Lifetime warranty.
Out of stock